Dimension: DN15, DN20, DN25, DN32, DN40
Feature: 3-Wire Two Control
Mode: 2-Way / 3-Way (3-Way is T-type)
Open/Close Time: 25 seconds
Maximum Operating Pressure: 1.6 MPa / 232 psi
Medium: Water, Air, Oil
Voltage: AC 220V 50/60Hz available
Power: Max 6W
Operation: Motor and manual (with manual switching function)
Lifetime: 100,000 times
Material: Brass, ABS plastic
Sealing Material: EPDM & PTFE
Environmental Temperature: 0 °C to 65 °C
Medium Temperature: 0 °C to 95 °C
Protection Class: IP 54

Note a few points!

1. The valve open and close line must not be activated simultaneously, otherwise the motor may be damaged or normal operation may not be possible!
2. It is not allowed to parallel multiple switches at the same time, otherwise they will be connected in series and abnormally.
3. It is not waterproof and should not be used outdoors or in humid environments.
4. The voltage must be stable within 220 ± 10%.

This brass motorized ball valve is applicable to the air conditioning fan system and the heating system for out-control. The ball valve and actuator assembly use synchronous motor drive with built-in limit contacts, allowing the valve to be fully opened or closed when power is on, with stable operation.

This valve is used in heating systems and fan coil systems for air conditioning on-off control. The valve and actuator components are driven by a rotating ball valve for 90 percent of movement. Synchronous motor-driven actuator with built-in limit contacts allows the valve to be fully opened or closed when power is on, with stable operation.