The A.O. Smith BFC Cyclone is a fully enclosed, high-efficiency condensing boiler (109% gross). This boiler can be installed virtually anywhere, thanks to the high flexibility of the flue gas system, which can extend up to 100 meters. Ecodesign energy efficiency up to 93%.
Features:
Technical Specifications:
| Feature | Value |
|---|---|
| Brand | A.O. Smith |
| Supplier Code | BFC 60 N |
| EAN Code | 8717449113919 |
| Discount Group | 083 |
| Width | 705 mm |
| Height | 1925 mm |
| Depth | 805 mm |
| Nominal Power | 62.2 kW |
| Diameter | 705 mm |
| Energy Efficiency Class | A |
| Volume | 368 l |
| Boiler Tank Material | Steel |
| With Thermometer | No |
| Connection Voltage | 230 V |
| Closed Design | Yes |
| Water Heating Efficiency (Nwh) | 90 % |
| Capacity Profile | XXL |
| Nominal Diameter of Hot Water Connection | 1 1/2" (40) |
| Maximum Hydrogen Blend with NAT Gas | 20 % |
| Suitable for Low Calorific Value Natural Gas | Not suitable |
| Suitable for High Calorific Value Natural Gas | Standard factory setting |
| Suitable for Propane | With conversion kit, not included |
| Suitable for Butane | With conversion kit, not included |
| Suitable for Methane | With conversion kit, not included |
| Suitable for LPG | With conversion kit, not included |
| Suitable for Hydrogen | Standard factory setting |
| Nominal Diameter of Cold Water Connection | 1 1/2" (40) |
| Outer Jacket Material | Steel |
| Heating Time from 10 °C to 65 °C | 23 minutes |
| With Cleaning Opening | Yes |
| Pilot Flame Burner | No |
| Protective Anode | Yes |
| Wall Mounting | No |
| Maximum Operating Pressure | 8 bar |
| Fuel Connection | External thread conical BSPT-R (ISO 7-1 / EN 10226-1) |
| Air Supply Connection | Push-fit connection |
| Nominal Diameter of Air Supply Channel | 100 mm |
| Flue Gas Connection | Push-fit connection |
| Condensate Connection | Compression ring |
| External Pipe Diameter for Condensate | 40 mm |
| Surface Protection of Tank | Enamelled |
| With Pressure Relief Valve | No |
| Hot Water Capacity at 40°C Continuously | 1300 l/min |
| Cold Water Connection | External thread conical BSPT-R (ISO 7-1 / EN 10226-1) |
| Hot Water Connection | External thread conical BSPT-R (ISO 7-1 / EN 10226-1) |
| Vertical Installation | Yes |
| Electronic Ignition | Yes |
| Nominal Diameter of Flue Gas Connection | 150 mm |
| With Draft Breaker | No |
| With Drainage Option (Connection) | Yes |
| Nominal Diameter of Fuel Connection | 3/4" (20) |
| Conversion Kit Required | Yes |
