Do you have a question about this product?
Our employee is happy to help you find the right product
The A.O. Smith Innovo is a fully enclosed condensing gas boiler with a power range of 11.7 kW to 31.3 kW and a capacity of 160 to 380 liters. Depending on the model, it can achieve a capacity profile from XL to XXL, with an ErP efficiency rating between 90% and 94%. The entire range has a maximum temperature of 85°C and a NOx emission of <37 mg/kWh.
| Feature | Value |
|---|---|
| Brand | A.O. Smith |
| Supplier Code | IR-32-380 NL NAT |
| EAN Code | 8717449283865 |
| Category | 083 |
| Dimensions (W x H x D) | 610 mm x 1745 mm x 890 mm |
| Nominal Power | 31.3 kW |
| Diameter | 610 mm |
| Energy Efficiency Class | A |
| Capacity | 380 l |
| Boiler Tank Material | Steel |
| With Thermometer | No |
| Connection Voltage | 230 V |
| Closed Design | Yes |
| Water Heating Efficiency (Nwh) | 90% |
| Capacity Profile | XXL |
| Nominal Hot Water Diameter | 1" (25) |
| Max. Hydrogen Mixing Ratio with Natural Gas | 20% |
| Suitable for Low-Calorific Natural Gas | Not suitable |
| Suitable for High-Calorific Natural Gas | Standard factory setting |
| Suitable for Propane | Requires a conversion kit (not included) |
| Suitable for Butane | Requires a conversion kit (not included) |
| Suitable for Methane | Requires a conversion kit (not included) |
| Suitable for LPG | Requires a conversion kit (not included) |
| Suitable for Hydrogen | Standard factory setting |
| Nominal Cold Water Diameter | 1" (25) |
| Casing Material | Steel |
| Heating Time (10°C - 65°C) | 39 min |
| With Cleaning Opening | Yes |
| Pilot Burner | No |
| Protective Anode | Yes |
| Wall Mountable | No |
| Max. Operating Pressure | 8 bar |
| Fuel Connection | Soldered end |
| Outer Fuel Pipe Diameter | 15 mm |
| Air Supply Connection | Push-fit connection |
| Nominal Air Supply Channel Diameter | 80 mm |
| Flue Gas Exhaust Connection | Push-fit connection |
| Condensate Connection | Compression ring |
| Outer Condensate Pipe Diameter | 40 mm |
| Tank Surface Protection | Enameled |
| With Pressure Reducing Valve | No |
| Continuous Hot Water Capacity at 40°C | 680 l/min |
| Cold Water Connection | Internal cylindrical BSPT-Rp (ISO 7-1 / EN 10226-1) |
| Hot Water Connection | Internal cylindrical BSPT-Rp (ISO 7-1 / EN 10226-1) |
| Vertical Installation | Yes |
| Electronic Ignition | Yes |
| Nominal Flue Gas Exhaust Diameter | 125 mm |
| With Draft Interrupter | No |
| With Drainage Option (Connection) | Yes |
| Conversion Kit Required | Yes |
Our employee is happy to help you find the right product
Deliverytime