Do you have a question about this product?
Our employee is happy to help you find the right product
The P20C is an energy-efficient boiler designed for the project market, providing both heating and hot water. It features a compact design, modular construction, high performance, easy installation, and low total cost of ownership. The P-Series is compatible with the Energion M and can also be used with other hybrid heat pumps.
Feature | Value |
---|---|
Brand | Atag |
Supplier Code | TZ20B50H |
EAN Code | 8719874613545 |
Width | 440 mm |
Height | 700 mm |
Depth | 275 mm |
Number of Phases | 1 |
Material Quality | Other |
Flow Connection | Compression fitting |
Return Connection | Compression fitting |
Nominal Voltage | 196 - 253 V |
Frequency | 50 Hz |
Sealed System | Yes |
Nominal Hot Water Power | 23.5 kW |
Nominal Hot Water Load (Higher Heating Value) | 26.7 kW |
Nominal Hot Water Load (Lower Heating Value) | 24 kW |
Water Heating Efficiency (Nwh) | 85 % |
SEER (Ns) under Average Conditions | 93 % |
Capacity Profile | XL |
Energy Efficiency Class (Space Heating) | A |
Energy Efficiency Class (Water Heating) | A |
Nominal Hot Water Diameter | 1/2" (15 mm) |
Additional Power Consumption at Full Load (ELmax) | 0.048 kW |
Useful Heat Output at Nominal Load (P4) and High Temperature | 17.6 kW |
Useful Efficiency at Nominal Load (n4) and High Temperature | 87.9 % |
Standby Power Consumption (Psb) | 0.004 kW |
Standby Heat Loss (Pstby) | 0.047 kW |
Built-in Economiser | No |
Space Heating Efficiency | 93 % |
Heat Exchanger Material | Stainless Steel (RVS) |
Adjustable Heating Power | Yes |
Nominal Cold Water Diameter | 1/2" (15 mm) |
Minimum Hot Water Flow Rate | 1.5 l/min |
Integrated Pump Control | Yes |
Gaskeur VR/SV | No |
Gaskeur NZ | No |
Nominal Load (Lower Heating Value) | 18 kW |
Nominal Load (Higher Heating Value) | 20 kW |
Minimum Operating Pressure | 1 bar |
Minimum Return Temperature | 20 °C |
Maximum Gas Inlet Pressure | 60 mbar |
Hot Water Capacity at 60 °C | 6 l/min |
Integrated Weather Compensation Controller | Yes |
Built-in Expansion Vessel | No |
Water-Side Resistance at ΔT 20 °C | 20 kPa |
Nominal Power 80-60 °C | 17.7 kW |
Maximum Flow Temperature (Operating Temperature) | 85 °C |
Maximum Operating Pressure | 3 bar |
Built-in Filling/Drain Valve | No |
Built-in Pressure Relief Valve | No |
External Flow Pipe Diameter | 22 mm |
External Return Pipe Diameter | 22 mm |
Fuel Connection | Compression fitting |
External Fuel Pipe Diameter | 15 mm |
Air Supply Connection | Socket |
Nominal Air Supply Duct Diameter | 100 mm |
Flue Gas Exhaust Connection | Socket |
External Cold Water Pipe Diameter | 15 mm |
External Hot Water Pipe Diameter | 15 mm |
Condensate Connection | Other |
External Condensate Pipe Diameter | 21.5 mm |
Minimum Gas Inlet Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gaskeur VR | No |
Cold Water Connection | Compression fitting |
Hot Water Connection | Compression fitting |
Nominal Flue Gas Exhaust Diameter | 60 mm |
Burner Control High/Low | No |
Modulating Burner Control | Yes |
External Expansion Connection Diameter | 15 mm |
Built-in Pressure Gauge | Yes |
Condensing Technology | Yes |
Gaskeur HR | Yes |
Pilot Flame | No |
Second Return Connection | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | No |
Control Signal OpenTherm | Yes |
Operation as Open System (Air Supply Possible) | Yes |
Nominal Power 50-30 °C | 19.4 kW |
Suitable for Propane | No |
Suitable for Butane | No |
Suitable for Methane | No |
Max. Allowable Operating Pressure | 3 bar |
Nominal Flow Diameter | 3/4" (20 mm) |
Nominal Return Diameter | 3/4" (20 mm) |
Nominal Fuel Diameter | 1/2" (15 mm) |
Hot Water Storage Volume | 0 l |
Conversion Kit Required | No |
Built-in Safety Valve | No |
Expansion Connection | Compression fitting |
CW Label | 3 |
Gaskeur HR | Yes |
Gaskeur NZ | No |
Our employee is happy to help you find the right product