Do you have a question about this product?
Our employee is happy to help you find the right product
The Compress 2000 AWF full monoblock heat pump only has an outdoor unit. This saves space, time, and costs. This monoblock heat pump offers a flexible and cost-efficient solution for sustainable heating, cooling, and hot water. With a wide power range of 4 to 30 kW, the Compress 2000 AWF is suitable for both new and existing homes, as well as small apartment buildings, for example.
Sustainable Heating and Cooling
The Compress 2000 AWF heat pump can be used for fully gas-free heating (all-electric) or hybrid heating. The hybrid variant is also All-electric Ready: if you decide to switch to fully gas-free later, it can be done quickly and easily with an electric element (accessory).
No Indoor Unit, Easy to Integrate
The Bosch Compress 2000 AWF full monoblock heat pump only has an outdoor unit, which saves time and costs during installation. Additionally, it requires very little space—less than 2 m² for the entire installation. This makes it possible to install the heat pump on a balcony, on the wall, or on the ground.
Features:
Technical Specifications:
| Feature | Value |
|---|---|
| Brand | Bosch |
| Supplier Code | 7738602277 |
| EAN Code | 4062321737917 |
| Discount Group | 055 |
| Width | 1295 mm |
| Height | 717 mm |
| Depth | 426 mm |
| Weight | 86 kg |
| Number of Phases | 1 |
| Control Type | Weather-dependent control |
| Cascadeable | Yes |
| Tank Volume | 0 l |
| Remote Control | No |
| Device Fusing | 12 A |
| Frequency | 50 Hz |
| Protection Rating (IP) | IP24 |
| Connection Voltage | 230 - 230 |
| Max. Heating Supply Temperature | 65 °C |
| Noise Level (in operation) | 0 - 55 |
| Data Transfer via USB | No |
| Suitable for Auxiliary Heating | Yes |
| Control for Boiler Regulation | Yes |
| Control for Buffer Tank Regulation | Yes |
| External Control Required | No |
| Modulation Percentage | 20 - 100 |
| Data Transfer via Bus Connection | No |
| Pump Type (System Pump) | Energy-saving |
| Pump Voltage Type (System Pump) | AC |
| Pump Speed Control (System Pump) | Built-in |
| Type of Speed Control (System Pump) | Automatically controlled by dT |
| Built-in Soft Starter | No |
| Maximum Electrical Power Limitation | 12 A |
| Suitable for Active Cooling | Yes |
| Cooling Capacity at 35/18°C according to EN 14511 | 4.5 - 4.5 |
| Cooling Capacity at 35/7°C according to EN 14511 | 4.7 - 4.7 |
| Hot Water Regulation Integrated | Yes |
| Energy Efficiency of Water Heating (Nwh) | 0 % |
| SEER Low-Temperature Application (35°C) under Average Conditions | 5.5 |
| SEER Low-Temperature Application (35°C) under Warmer Conditions | 3.45 |
| COPd at Tj=+7°C | 4.41 |
| Refrigerant Content | 1.4 kg |
| Global Warming Potential (GWP) | 675 |
| Energy Efficiency Class for Space Heating (811/2013/EU) | A+++ |
| Heating Capacity at -7/35°C according to EN 14511 | 4.7 kW |
| PED Category in Compliance with 2014/68/EU | 1 |
| Pool Regulation | No |
| Nominal Diameter Central Heating | 1" outer |
| Suitable for Hot Water | Yes |
| Room Temperature Control | Yes |
| Suitable for Pool Water Heating | Yes |
| Installation Position | Outdoor installation |
| Refrigerant Type | R32 |
| Acoustic Power (Lwa) according to EN 12102 at 0/35°C | 55 dB |
| Nominal Flow Rate of Heat Delivery System | 0.11 l/s |
| Maximum Working Pressure of Heat Delivery System | 3 bar |
| External Pipe Diameter for Heat Delivery System Connection | 25.4 mm |
| Heating Capacity at 7/35°C according to EN 14511 | 4.2 kW |
| COP at 7/35°C according to EN 14511 | 5.1 |
| Air Temperature | -25 - 42 |
| Sound Pressure Level according to EN 12102 at 0/35°C at 1 m Distance | 41 dB |
| Data Transfer via Internet | No |
| Connecting and Controlling Multiple Heat Delivery Systems | Yes |
| Optimization Type | Room Thermostat |
| Modulating Compressor | Yes |
Our employee is happy to help you find the right product
