Do you have a question about this product?
Our employee is happy to help you find the right product
The Condens 7000 WP is the new series of high-power HR boilers, successor to the Nefit Topline HR series. Very compact and powerful, ranging from 50 to 150 kW. With the new cascade sets, up to 600 kW can be achieved in just one square meter – the most compact system on the market. Other notable advantages: an exceptionally short installation time and low height. A cascade setup is no higher than 1.60 meters, allowing it to fit into low boiler rooms.
✔ The most compact cascade: only 1.60 m high
✔ Faster to install than comparable systems
With the new frames, cascades can be built without additional tools. The new "Slide & Guide" system allows the units to slide easily into the frames. A cascade of two Condens 7000 WP units can be installed in just 21 minutes.
Nefit Bosch developed the Condens 7000 WP and the cascade sets together with installers. The unit can be easily lifted by two people thanks to its compact size, its light weight of only 74 kg, and smart handles. And thanks to the Twist Lock closures, it can be easily opened, providing quick access to all components.
The units are ready for hydrogen blending. The packaging is made from 100% recyclable cardboard, without environmentally harmful polystyrene (styrofoam). Less harmful to the environment and saves cleanup work.
| Feature | Value |
|---|---|
| Brand | Bosch |
| Supplier Code | 7736702203 |
| EAN Code | 4062321548919 |
| Discount Group | 008 |
| Width | 520 mm |
| Height | 1120 mm |
| Depth | 457 mm |
| Number of Phases | 1 |
| Energy Efficiency Class | A |
| Material Quality | Other |
| Supply Connection | Compression Fittings |
| Return Connection | Compression Fittings |
| Frequency | 50 Hz |
| Connection Voltage | 0 - 230 V |
| Closed Version | Yes |
| SEER (Ns) under average conditions | 93 |
| Heat Exchanger Material | Aluminium |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | No |
| Gas Certification NZ | No |
| Nominal Load Lower Value | 19.3 kW |
| Nominal Load Upper Value | 96.5 kW |
| Min. Operating Pressure | 0 bar |
| Max. Gas Pressure | 37.5 mbar |
| Built-in Weather-Dependent Control | Yes |
| Built-in Expansion Vessel | No |
| Hydraulic Resistance at dT 20 °C | 24 kPa |
| Nominal Power 80-60 °C | 94.5 kW |
| Max. Supply Temperature (Operating Temperature) | 85 °C |
| Max. Operating Pressure | 6 bar |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| Fuel Connection | External Thread |
| Air Supply Connection | Socket |
| Nominal Air Supply Channel Diameter | 160 mm |
| Flue Gas Outlet Connection | Other |
| Condensate Connection | Flexible |
| Min. Gas Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Nominal Flue Gas Outlet Diameter | 110 mm |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | No |
| Condensing | Yes |
| Gas Certification HR | Yes |
| Efficiency | 108.7% |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | Yes |
| Control Signal 0-10V | Yes |
| Control Signal OpenTherm | No |
| Operates as Open Version (Air Supply) | Yes |
| Nominal Power 50-30 °C | 99.5 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Permissible Operating Pressure | 6 bar |
| Nominal Supply Diameter | 1 1/2" (40) |
| Nominal Return Diameter | 1 1/2" (40) |
| Nominal Fuel Diameter | 1" (25) |
| Nominal Condensate Diameter | Other |
| Conversion Kit Required | Yes |
| Expansion Connection | Compression Fittings |
| Gas Certification HR | Yes |
| Gas Certification NZ | No |
| Other Article Codes | 7736700868 |
Our employee is happy to help you find the right product
