Do you have a question about this product?
Our employee is happy to help you find the right product
The Condens 7000 WP is the new series of high-performance HR boilers, the successor to the Nefit Topline HR series. Extremely compact with high power, ranging from 50 to 150 kW. With the new cascade sets, up to 600 kW can be achieved per square meter: the most compact system on the market. Other notable advantages include an exceptionally short installation time and a low height. A cascade setup is no taller than 1.60 meters, allowing it to fit into low boiler rooms.
✔ The most compact cascade: just 1.60 m high
✔ Faster to install than comparable systems
With the new frames, cascades can be assembled without extra tools. The new "Slide & Guide" system allows the devices to be easily slid into the frames. A cascade of two Condens 7000 WP units can be assembled in just 21 minutes.
Nefit Bosch developed the Condens 7000 WP and the cascade sets together with installers. Due to its compact size, weight of only 74 kg, and smart handles, the device can be easily lifted by two people. Thanks to the Twist Lock closures, it can be easily opened, and all components are quickly accessible.
The devices are ready for hydrogen blending. The packaging is made of 100% recyclable cardboard, without environmentally harmful polystyrene (Styrofoam). This is more environmentally friendly and reduces cleaning work.
| Feature | Value |
|---|---|
| Brand | Bosch |
| Supplier Code | 7736702204 |
| EAN Code | 4062321548926 |
| Discount Group | 008 |
| Width | 520 mm |
| Height | 1120 mm |
| Depth | 587 mm |
| Number of Phases | 1 |
| Energy Efficiency Class | A |
| Material Quality | Other |
| Supply Connection | Compression fitting |
| Return Connection | Compression fitting |
| Frequency | 50 Hz |
| Connection Voltage | 0 - 230 V |
| Closed Version | No |
| SEER (Ns) at Average Conditions | 93 |
| Heat Exchanger Material | Aluminum |
| Built-in Pump Control | Yes |
| Gas Approval VR/SV | No |
| Gas Approval NZ | No |
| Nominal Load Lower Value | 24.5 kW |
| Nominal Load Upper Value | 119.3 kW |
| Min. Operating Pressure | 0 bar |
| Max. Gas Supply Pressure | 37.5 mbar |
| Built-in Weather-Dependent Regulator | Yes |
| Built-in Expansion Tank | No |
| Hydraulic Resistance at dT 20 °C | 31.2 kPa |
| Nominal Power 80-60 °C | 118.1 kW |
| Max. Supply Temperature (Operating Temperature) | 85 °C |
| Max. Operating Pressure | 6 bar |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| Fuel Connection | External thread |
| Air Supply Connection | Socket |
| Nominal Air Supply Duct Diameter | 160 mm |
| Flue Gas Outlet Connection | Other |
| Condensate Connection | Flexible |
| Min. Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Approval VR | No |
| Nominal Flue Gas Duct Diameter | 110 mm |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | No |
| Condensing | Yes |
| Gas Approval HR | Yes |
| Efficiency | 107.3 % |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | Yes |
| Control Signal 0-10V | Yes |
| Control Signal OpenTherm | No |
| Operation as Open Version (Air Supply) | Yes |
| Nominal Power 50-30 °C | 124.5 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Permissible Operating Pressure | 6 bar |
| Nominal Supply Diameter | 1 1/2" (40) |
| Nominal Return Diameter | 1 1/2" (40) |
| Nominal Fuel Diameter | 1" (25) |
| Nominal Condensate Diameter | Other |
| Conversion Set Required | Yes |
| Expansion Connection | Compression fitting |
| Gas Approval HR | Yes |
| Gas Approval NZ | No |
Our employee is happy to help you find the right product
