Do you have a question about this product?
Our employee is happy to help you find the right product
The Condens 7000 WP is the new series of high-performance HR boilers, the successor to the Nefit Topline HR series. Very compact and powerful, with outputs ranging from 50 to 150 kW. And with the new cascade sets, up to 600 kW can be achieved in just one square meter: the most compact system on the market. Other notable advantages include an extremely short installation time and the low height. A cascade setup is no higher than 1.60 meters, making it suitable for low-ceiling boiler rooms.
✔ The most compact cascade: only 1.60 meters high
✔ Faster installation than comparable systems
With the new frames, cascades can be assembled without additional tools. The new "Slide & Guide" system allows the devices to slide easily into the frames. Within 21 minutes, a cascade of two Condens 7000 WP units is installed.
The Condens 7000 WP and the cascade sets were developed by Nefit Bosch together with installers. Thanks to its compact size, weighing only 74 kg, and its smart handles, the unit can easily be lifted by two people. The Twist Lock closures make it easy to open, and all components are quickly accessible.
✔ Ready for hydrogen blending
✔ Packaging made from 100% recyclable cardboard, without environmentally harmful polystyrene (styrofoam)
✔ Less waste and easier disposal
| Feature | Value |
|---|---|
| Brand | Bosch |
| Supplier Code | 7736702201 |
| EAN Code | 4062321548902 |
| Discount Group | 008 |
| Width | 520 mm |
| Height | 1120 mm |
| Depth | 457 mm |
| Number of Phases | 1 |
| Energy Efficiency Class | A |
| Material Quality | Other |
| Supply Connection | Compression fitting |
| Return Connection | Compression fitting |
| Frequency | 50 Hz |
| Supply Voltage | 0 - 230 V |
| Closed Version | No |
| SEER (Ns) under average conditions | 93 |
| Heat Exchanger Material | Aluminum |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | No |
| Gas Certification NZ | No |
| Nominal Load Lower Value | 13.3 kW |
| Nominal Load Upper Value | 64.3 kW |
| Min. Operating Pressure | 0 bar |
| Max. Gas Supply Pressure | 37.5 mbar |
| Built-in Weather-Dependent Controller | Yes |
| Built-in Expansion Tank | No |
| Water-side Resistance at ΔT 20 °C | 13 kPa |
| Nominal Output 80-60 °C | 62.6 kW |
| Max. Supply Temperature (Operating Temp.) | 85 °C |
| Max. Operating Pressure | 6 bar |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| Fuel Connection | External thread |
| Air Supply Connection | Socket |
| Nominal Pipe Diameter Air Supply | 160 mm |
| Flue Gas Outlet Connection | Other |
| Condensate Connection | Flexible |
| Min. Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Nominal Pipe Diameter Flue Gas Outlet | 110 mm |
| Burner Control High/Low | No |
| Burner Control Modulating | Yes |
| Built-in Manometer | No |
| Condensing | Yes |
| Gas Certification HR | Yes |
| Efficiency | 108.7 % |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | Yes |
| Control Signal 0-10V | Yes |
| Control Signal OpenTherm | No |
| Operation as Open Version (Air Supply) | Yes |
| Nominal Output 50-30 °C | 69.5 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Allowable Operating Pressure | 6 bar |
| Nominal Supply Diameter | 1 1/2" (40) |
| Nominal Return Diameter | 1 1/2" (40) |
| Nominal Fuel Diameter | 1" (25) |
| Nominal Condensate Diameter | Other |
| Conversion Kit Required | Yes |
| Expansion Connection | Compression fitting |
| Gas Certification HR | Yes |
| Gas Certification NZ | No |
| Other Article Codes | 0081307; 7736700867 |
Our employee is happy to help you find the right product
