Do you have a question about this product?
Our employee is happy to help you find the right product
The Condens 7000 WP is the new series of high-performance HR boilers, the successor to the Nefit Topline HR series. Very compact with high power, ranging from 50 to 150 kW. With the new cascade sets, up to 600 kW can be achieved on one square meter – the most compact system on the market. Other notable advantages: an incredibly short installation time and a low height. A cascade setup is no higher than 1.60 meters, so it fits into low boiler rooms.
✔ The most compact cascade: only 1.60 m high
✔ Faster to install than comparable systems
With the new frames, cascades can be built without additional tools. Thanks to the "Slide & Guide" system, the units slide easily into the frames. A cascade of two Condens 7000 WP units is assembled in just 21 minutes.
Nefit Bosch developed the Condens 7000 WP and the cascade sets in collaboration with installers. Thanks to its compact size, light weight of only 74 kg, and smart handles, the unit can easily be lifted by two people. And with the Twist Lock closures, it can be easily opened, and all components are quickly accessible.
The units are ready for hydrogen blending. The packaging is made from 100% recyclable cardboard, without environmentally harmful polystyrene (styrofoam). Less environmental impact and easier cleanup.
| Feature | Value |
|---|---|
| Brand | Bosch |
| Supplier Code | 7736702201 |
| EAN Code | 4062321548902 |
| Discount Group | 008 |
| Width | 520 mm |
| Height | 1120 mm |
| Depth | 457 mm |
| Number of Phases | 1 |
| Energy Efficiency Class | A |
| Material Quality | Other |
| Inlet Connection | Compression fitting |
| Return Connection | Compression fitting |
| Frequency | 50 Hz |
| Connection Voltage | 0 - 230 V |
| Closed Construction | No |
| SEER (Ns) under average conditions | 93 |
| Heat Exchanger Material | Aluminum |
| Built-in Pump Switch | Yes |
| Gas Certification VR/SV | No |
| Gas Certification NZ | No |
| Nominal Load Lower Value | 13.3 kW |
| Nominal Load Upper Value | 64.3 kW |
| Min. Operating Pressure | 0 bar |
| Max. Gas Supply Pressure | 37.5 mbar |
| Built-in Weather-Dependent Controller | Yes |
| Built-in Expansion Vessel | No |
| Hydraulic Resistance at ΔT 20 °C | 13 kPa |
| Nominal Power (80-60°C) | 62.6 kW |
| Max. Inlet Temperature | 85 °C |
| Max. Operating Pressure | 6 bar |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| Fuel Connection | External thread |
| Air Supply Connection | Socket |
| Nominal Air Supply Channel Diameter | 160 mm |
| Flue Gas Connection | Other |
| Condensate Connection | Flexible |
| Min. Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Nominal Flue Gas Diameter | 110 mm |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | No |
| Condensing | Yes |
| Gas Certification HR | Yes |
| Efficiency | 108.7 % |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | Yes |
| Control Signal 0-10V | Yes |
| Control Signal OpenTherm | No |
| Operation as Open Construction (Air Supply) | Yes |
| Nominal Power (50-30°C) | 69.5 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Allowable Operating Pressure | 6 bar |
| Nominal Inlet/Return Diameter | 1 1/2" (40) |
| Nominal Fuel Diameter | 1" (25) |
| Nominal Condensate Diameter | Other |
| Conversion Kit Required | Yes |
| Expansion Connection | Compression fitting |
| Gas Certification HR | Yes |
| Gas Certification NZ | No |
| Other Item Codes | 0081307; 7736700867 |
Our employee is happy to help you find the right product
