The Intergas Kompakt Solo HRE A is a central heating boiler without an integrated hot water supply. A solo boiler is the ideal solution if you do not require a combination boiler for hot water production. Additionally, the Intergas Kompakt Solo HRE can be easily combined with an indirectly heated boiler, allowing you to choose the configuration that best suits your hot water comfort needs.
The Intergas Kompakt Solo HRE A features a stepless modulating control that automatically adjusts the boiler's output to match the heating demand, ensuring efficient energy use.
All components of the Intergas Kombi Kompakt HRE Solo are easily accessible. The front panel can also be removed, making it easy to install the unit in a kitchen cabinet. Maintaining a high-efficiency boiler has never been this simple!
| Feature | Value |
|---|---|
| Brand | Intergas |
| Supplier Code | 040317 |
| EAN Code | 8718556040310 |
| Width | 450 mm |
| Height | 590 mm |
| Depth | 240 mm |
| Power Supply | 230 V |
| Energy Efficiency Class | A |
| Flow Connection | Compression fitting |
| Return Connection | Compression fitting |
| Sealed System | Yes |
| Energy Efficiency for Water Heating (Nwh) | 0 % |
| SEER (Ns) Under Average Conditions | 93 |
| Additional Power Consumption (ELmax) | 0.035 kW |
| Useful Heat Output at 80-60 °C | 17.8 kW |
| Efficiency at 80-60 °C | 86.1 % |
| Standby Power Consumption (Psb) | 0.002 kW |
| Standby Heat Loss (Pstby) | 0.038 kW |
| Heat Exchanger Material | Aluminum |
| Built-in Pump Control | Yes |
| Gaskeur VR/SV Certification | Yes |
| Gaskeur NZ Certification | No |
| Nominal Input (Lower Value) | 18.7 kW |
| Nominal Input (Upper Value) | 20.8 kW |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Gas Supply Pressure | 30 mbar |
| Built-in Weather-Dependent Control | Yes |
| Built-in Expansion Vessel | No |
| Maximum Flow Temperature | 90 °C |
| Built-in Fill/Drain Valve | No |
| Built-in Safety Valve | No |
| External Pipe Diameter (Flow) | 22 mm |
| External Pipe Diameter (Return) | 22 mm |
| External Pipe Diameter (Fuel) | 15 mm |
| Air Supply Connection | Socket end |
| Nominal Duct Diameter (Air Supply) | 80 mm |
| Flue Gas Exhaust Connection | Socket end |
| Condensate Connection | Flexible |
| External Pipe Diameter (Condensate) | 25.4 mm |
| Minimum Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gaskeur VR Certification | No |
| Nominal Duct Diameter (Flue Gas Exhaust) | 80 mm |
| Burner Control High/Low | No |
| Burner Control Modulating | Yes |
| Built-in Pressure Gauge | Yes |
| Gaskeur HR Certification | Yes |
| Efficiency | 107 % |
| Open/Sealed System | No |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | No |
| Control Signal OpenTherm | Yes |
| Operation as Open System (Air Supply) | No |
| Nominal Output 50-30 °C | 18.1 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Allowable Operating Pressure | 3 bar |
| Conversion Kit Required | Yes |
