The Intergas Kompakt Solo HRE A is a central heating boiler without an integrated hot water supply. A solo boiler is the solution if you do not need a combi boiler for hot water preparation. Additionally, the Intergas Kompakt Solo HRE is very easy to combine with an indirect heated boiler. This allows you to choose the combination that best suits your preferences and needs for hot water comfort.
The Intergas Kompakt Solo HRE A is equipped with a stepless modulating control, which ensures that the boiler's output is automatically adjusted to the heating demand.
All components of the Intergas Kombi Kompakt HRE Solo are easily accessible. Additionally, the front casing is removable, so the device can be placed in a kitchen cabinet without any issues. Maintenance of an HR boiler has never been so easy.
| Feature | Value |
|---|---|
| Brand | Intergas |
| Supplier Code | 040377 |
| EAN Code | 8718556040372 |
| Discount Group | 051 |
| Width | 450 mm |
| Height | 710 mm |
| Depth | 240 mm |
| Power Supply | 230 V |
| Energy Efficiency Class | A |
| Flow Connection | Compression |
| Return Connection | Compression |
| Closed Version | Yes |
| Energy Efficiency for Water Heating (Nwh) | 0 % |
| SEER (Ns) under average conditions | 93 |
| Supplementary electricity consumption at full load (ELmax) | 0.035 kW |
| Useful heat output at nominal heat output and operation at high temperature (P4) | 26.3 kW |
| Useful efficiency at nominal heat output and operation at high temperature (n4) | 87.1 % |
| Supplementary electricity consumption in standby mode (Psb) | 0.002 kW |
| Standby heat loss (Pstby) | 0.038 kW |
| Heat Exchanger Material | Aluminium |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | Yes |
| Gas Certification NZ | No |
| Nominal Load Lower Value | 27.3 kW |
| Nominal Load Upper Value | 30.4 kW |
| Minimum Working Pressure | 0.5 bar |
| Maximum Gas Supply Pressure | 30 mbar |
| Built-in Weather-Dependent Regulator | Yes |
| Built-in Expansion Vessel | No |
| Nominal Output 80-60 °C | 26.3 kW |
| Maximum Supply Temperature (Operating Temperature) | 90 °C |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| External Pipe Diameter Flow | 22 mm |
| External Pipe Diameter Return | 22 mm |
| External Pipe Diameter Fuel | 15 mm |
| Air Supply Connection | End cap |
| Nominal Channel Diameter Air Supply | 80 mm |
| Flue Gas Connection | End cap |
| Condensate Connection | Flexible |
| External Pipe Diameter Condensate | 25.4 mm |
| Minimum Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Nominal Channel Diameter Flue Gas | 80 mm |
| Burner Control High/Low | No |
| Burner Control Modulating | Yes |
| Built-in Manometer | Yes |
| Gas Certification HR | Yes |
| Efficiency | 107 % |
| Open/Closed Version | No |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | No |
| Control Signal OpenTherm | Yes |
| Operation as Open Version (Air Supply) Possible | No |
| Nominal Output 50-30 °C | 27.1 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Maximum Allowable Operating Pressure | 3 bar |
| Conversion Kit Required | Yes |
