The Intergas Kombi Kompakt HR has been one of the best-selling HR boilers in the Netherlands for years. The unique double HR technology ensures an efficiency of over 101% for hot water. This guarantees energy-efficient operation every time hot water is used. In the HReco series, Intergas uses only high-quality, energy-efficient, and durable components. The result: an exceptionally economical operating boiler.
The Kombi Kompakt HReco uses the unique double aluminum two-in-one heat exchanger. This patented Intergas design minimizes heat loss and ensures optimal heat transfer. The heating water and cold tap water flow directly through the heat exchanger, allowing the flue gases to cool as much as possible and optimally utilizing the condensation heat. The use of this technology makes a three-way valve unnecessary.
Feature | Value |
---|---|
Brand | Intergas |
Supplier Code | 041557 |
EAN Code | 8718556041553 |
Discount Group | 051 |
Width | 450 mm |
Height | 710 mm |
Depth | 240 mm |
Voltage | 230 V |
Inflow Connection | Compression |
Return Connection | Compression |
Closed Model | Yes |
Nominal Hot Water Power | 32.1 kW |
Nominal Upper Hot Water Load | 36.3 kW |
Nominal Lower Hot Water Load | 32.7 kW |
Water Heating Efficiency (Nwh) | 87 % |
SEER (Ns) under average conditions | 94 |
Capacity Profile | XL |
Space Heating Efficiency Class | A |
Water Heating Efficiency Class | A |
Additional Power Consumption at Full Load (ELmax) | 0.045 kW |
Useful Heat Output at Nominal Heat Output and High-Temperature Operation (P4) | 32 kW |
Useful Efficiency at Nominal Heat Output and High-Temperature Operation (n4) | 88.3 % |
Additional Power Consumption in Standby Mode (Psb) | 0.002 kW |
Standby Heat Loss (Pstby) | 0.038 kW |
Built-in Economizer | No |
Heat Exchanger Material | Aluminum |
Adjustable Heating Capacity | Yes |
Flow Threshold | 1.5 l/min |
Built-in Pump Control | Yes |
Gas Certification VR/SV | Yes |
Gas Certification NZ | Yes |
CW Label | 5 |
Nominal Lower Load | 32.7 kW |
Nominal Upper Load | 36.3 kW |
Min. Operating Pressure | 0.5 bar |
Max. Gas Supply Pressure | 30 mbar |
Hot Water Capacity at 60°C | 9 l/min |
Built-in Weather-Dependent Controller | Yes |
Built-in Expansion Vessel | No |
Nominal Power 80-60°C | 32 kW |
Max. Flow Temperature (Operating Temperature) | 90°C |
Built-in Fill/Drain Valve | No |
Built-in Pressure Relief Valve | No |
External Pipe Diameter Flow | 22 mm |
External Pipe Diameter Return | 22 mm |
Fuel Connection | Compression |
External Pipe Diameter Fuel | 15 mm |
Air Supply Connection | Socket end |
Nominal Channel Diameter Air Supply | 100 mm |
Flue Gas Outlet Connection | Socket end |
External Pipe Diameter Cold Tap Water | 15 mm |
External Pipe Diameter Hot Tap Water | 15 mm |
Condensate Connection | Flexible |
External Pipe Diameter Condensate | 25.4 mm |
Min. Gas Supply Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gas Certification VR | No |
Cold Tap Water Connection | Compression |
Hot Tap Water Connection | Compression |
Nominal Channel Diameter Flue Gas Outlet | 60 mm |
Burner Control High/Low | No |
Modulating Burner Control | Yes |
Built-in Manometer | Yes |
Gas Certification HR | Yes |
Efficiency | 107 % |
Pilot Flame | No |
Second Return Connection | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | No |
Control Signal OpenTherm | Yes |
Open Configuration Operation (Air Supply) Possible | Yes |
Suitable for Propane | Yes |
Suitable for Butane | No |
Suitable for Methane | No |
Max. Allowable Operating Pressure | 3 bar |
Conversion Kit Required | Yes |
Built-in Inlet Combination | No |