In the Intergas Xtreme, performance, intuitive control, contemporary design, and extremely high hot water efficiency go hand in hand.
The Intergas Xtreme uses the proven concept of the dual aluminium two-in-one heat exchanger. The patented Intergas design, with two separate copper circuits, ensures optimal heat transfer and minimal heat loss. The central heating water and cold tap water flow directly through the heat exchanger, allowing the flue gases to cool maximally and the condensation heat to be fully utilized.
In addition to this proven heat exchanger, the Intergas Xtreme features a second heat exchanger (heat recovery unit). This second heat exchanger is integrated into the flue gas outlet of the unit, further cooling the combustion gases. The residual heat from the flue gases is also used to preheat the tap water during central heating operation, reducing the energy required to bring the water to temperature. This results in an extremely high efficiency.
All Xtreme units are Hybrid Ready, meaning they are designed to be expanded into a hybrid heat pump system. This can be done immediately at the time of purchase, but it is also possible to expand the system at a later stage. This ensures a sustainable future.
All Xtreme units come standard with an RF module and are fully prepared for the future. This makes it even easier to control the heating via a smartphone in combination with the Intergas Gateway, the Comfort Touch thermostat, and the Comfort Touch app.
| Feature | Value |
|---|---|
| Brand | Intergas |
| Supplier Code | 015154 |
| EAN Code | 8718556215152 |
| Discount Group | 051 |
| Width | 450 mm |
| Depth | 240 mm |
| Supply Voltage | 230 V |
| Supply Connection | Compression |
| Return Connection | Compression |
| Closed Version | Yes |
| Nominal Load Upper Value Hot Water | 36.3 kW |
| Nominal Load Lower Value Hot Water | 32.7 kW |
| Energy Efficiency of Water Heating (Nwh) | 92% |
| SEER (Ns) under Average Conditions | 94 |
| Capacity Profile | XXL |
| Energy Efficiency Class for Space Heating | A |
| Energy Efficiency Class for Water Heating | A |
| Supplementary Electricity Consumption at Full Load (ELmax) | 0.1 kW |
| Useful Heat Output at Nominal Heat Output and High-Temperature Operation (P4) | 32 kW |
| Useful Efficiency at Nominal Heat Output and High-Temperature Operation (n4) | 88.3 % |
| Supplementary Electricity Consumption in Standby Mode (Psb) | 0.002 kW |
| Standby Heat Loss (Pstby) | 0.038 kW |
| Heat Exchanger Material | Aluminium |
| Heating Power Adjustable | Yes |
| Tap Flow Threshold | 1.5 l/min |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | Yes |
| Gas Certification NZ | Yes |
| CW Label | 5 |
| Nominal Load Lower Value | 32.7 kW |
| Nominal Load Upper Value | 36.3 kW |
| Minimum Working Pressure | 0.5 bar |
| Maximum Gas Supply Pressure | 30 mbar |
| Hot Water Capacity at 60°C | 9 l/min |
| Built-in Weather-Dependent Regulator | Yes |
| Built-in Expansion Vessel | No |
| Nominal Power 80-60°C | 32 kW |
| Maximum Supply Temperature (Working Temperature) | 90°C |
| Built-in Fill/Drain Valve | No |
| Built-in Overpressure Valve | No |
| External Pipe Diameter Supply | 22 mm |
| External Pipe Diameter Return | 22 mm |
| Fuel Connection | Compression |
| External Pipe Diameter Fuel | 15 mm |
| Air Supply Connection | End-fitting |
| Nominal Channel Diameter Air Supply | 100 mm |
| Flue Gas Outlet Connection | End-fitting |
| External Pipe Diameter Cold Tap Water | 15 mm |
| External Pipe Diameter Hot Tap Water | 15 mm |
| Condensate Connection | Flexible |
| External Pipe Diameter Condensate | 25.4 mm |
| Minimum Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Cold Tap Water Connection | Compression |
| Hot Tap Water Connection | Compression |
| Nominal Channel Diameter Flue Gas Outlet | 60 mm |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | Yes |
| Gas Certification HR | Yes |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | No |
| Control Signal OpenTherm | Yes |
| Open Execution (Air Supply) Operation Possible | No |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Maximum Allowable Operating Pressure | 3 bar |
| Conversion Kit Required | Yes |
| Built-in Intake Combination | No |
