Do you have a question about this product?
Our employee is happy to help you find the right product
In the Xtreme from Intergas, performance, intuitive operation, modern design, and extremely high efficiency for hot water go hand in hand.
The Intergas Xtreme uses the proven concept of the double aluminum two-in-one heat exchanger. The patented Intergas design, with two separate copper circuits, ensures optimal heat transfer and minimal heat loss. The central heating water and cold tap water flow directly through the heat exchanger, allowing the flue gases to cool down maximally, and the condensation heat is used to its fullest potential.
In addition to this proven heat exchanger, the Intergas Xtreme also uses a second heat exchanger (hot water recovery unit). This second heat exchanger is integrated into the appliance’s flue gas outlet, further cooling the combustion gases. Furthermore, the residual heat from the flue gases is used during heating to preheat the tap water. This reduces the energy needed to bring the water to the desired temperature. This results in an extremely high efficiency.
All Xtreme units are Hybrid Ready, meaning that these units are suitable for expansion into a hybrid heat pump system. This can be done directly at the time of purchase, but it can also be done later. This allows for a forward-looking, sustainable future.
All Xtreme units are equipped with an RF module as standard and are fully prepared for the future. This makes it even easier to control the heating via smartphone, using the Intergas Gateway, the Comfort Touch thermostat, and the Comfort Touch app.
| Feature | Value |
|---|---|
| Brand | Intergas |
| Supplier Code | 015144 |
| EAN Code | 8718556215145 |
| Discount Group | 051 |
| Width | 450 mm |
| Depth | 240 mm |
| Voltage Supply | 230 V |
| Flow Connection | Compression |
| Return Connection | Compression |
| Closed Construction | Yes |
| Nominal Load Upper Value for Hot Water | 36.3 kW |
| Nominal Load Lower Value for Hot Water | 32.7 kW |
| Energy Efficiency of Water Heating (Nwh) | 92% |
| SEER (Ns) under Average Conditions | 94 |
| Capacity Profile | XXL |
| Energy Efficiency Class for Room Heating | A |
| Energy Efficiency Class for Water Heating | A |
| Supplementary Electricity Use at Full Load (ELmax) | 0.045 kW |
| Useful Heat Output at Nominal Heat Output and High-Temperature Operation (P4) | 32 kW |
| Useful Efficiency at Nominal Heat Output and High-Temperature Operation (n4) | 88.3% |
| Supplementary Electricity Use in Standby Mode (Psb) | 0.002 kW |
| Standby Heat Loss (Pstby) | 0.038 kW |
| With Built-in Economizer | No |
| Heat Exchanger Material | Aluminum |
| Adjustable Heating Power | Yes |
| Flow Threshold | 1.5 l/min |
| Built-in Pump Switch | Yes |
| Gas Certification VR/SV | Yes |
| Gas Certification NZ | Yes |
| CW Label | 5 |
| Nominal Load Lower Value | 32.7 kW |
| Nominal Load Upper Value | 36.3 kW |
| Min. Operating Pressure | 0.5 bar |
| Max. Gas Supply Pressure | 30 mbar |
| Hot Water Capacity at 60°C | 9 l/min |
| Built-in Weather-Dependent Regulator | Yes |
| Built-in Expansion Vessel | No |
| Nominal Power 80-60°C | 32 kW |
| Max. Flow Temperature (Operating Temperature) | 90°C |
| Built-in Fill/Drain Valve | No |
| Built-in Overpressure Valve | No |
| External Pipe Diameter for Flow | 22 mm |
| External Pipe Diameter for Return | 22 mm |
| Fuel Connection | Compression |
| External Pipe Diameter for Fuel | 15 mm |
| Air Supply Connection | End cap |
| Nominal Pipe Diameter for Air Supply | 80 mm |
| Flue Gas Outlet Connection | End cap |
| External Pipe Diameter for Cold Tap Water | 15 mm |
| External Pipe Diameter for Hot Tap Water | 15 mm |
| Condensate Connection | Flexible |
| External Pipe Diameter for Condensate | 25.4 mm |
| Min. Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Cold Tap Water Connection | Compression |
| Hot Tap Water Connection | Compression |
| Nominal Pipe Diameter for Flue Gas Outlet | 80 mm |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | Yes |
| Gas Certification HR | Yes |
| Standby Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | No |
| Control Signal OpenTherm | Yes |
| Operation as Open Version (Air Supply) Possible | Yes |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Max. Allowable Operating Pressure | 3 bar |
| Conversion Kit Required | Yes |
| Built-in Inlet Combination | No |
Our employee is happy to help you find the right product
Deliverytime