Do you have a question about this product?
Our employee is happy to help you find the right product
In the Xtreme from Intergas, performance, intuitive operation, modern design, and an extremely high efficiency for hot water go hand in hand.
Extremely High Efficiency through Innovative Heat Exchangers
The Intergas Xtreme uses the proven concept of the double aluminum two-in-one heat exchanger. The patented Intergas design, with two separate copper circuits, ensures optimal heat transfer and minimal heat loss. The central heating water and the cold tap water flow directly through the heat exchanger, allowing the exhaust gases to cool down as much as possible and ensuring the condensation heat is used optimally.
In addition to this proven heat exchanger, the Intergas Xtreme utilizes a second heat exchanger (heat recovery unit). This second heat exchanger is integrated into the appliance's flue gas outlet, further cooling the combustion gases. Additionally, the residual heat from the flue gases is used during central heating operation to pre-heat the tap water, reducing the energy required to bring the water to temperature. As a result, an extremely high efficiency is achieved.
Hybrid Ready
All Xtreme units are Hybrid Ready, meaning these units are suitable for upgrading to a hybrid heat pump system. This can be done at the time of purchase, but it is also possible at a later stage. This looks ahead to a sustainable future.
Comfort Always and Everywhere at Your Fingertips
All Xtreme units are equipped with an RF module as standard and are fully prepared for the future. This makes it even easier to control the heating via smartphone in combination with the Intergas Gateway, the Comfort Touch thermostat, and the Comfort Touch app.
Features
Technical Specifications:
| Feature | Value |
|---|---|
| Brand | Intergas |
| Supplier Code | 015144 |
| EAN Code | 8718556215145 |
| Width | 450 mm |
| Depth | 240 mm |
| Power Supply | 230 V |
| Flow Connection | Compression fitting |
| Return Connection | Compression fitting |
| Closed Design | Yes |
| Nominal Load Upper Hot Water Value | 36.3 kW |
| Nominal Load Lower Hot Water Value | 32.7 kW |
| Energy Efficiency for Water Heating (Nwh) | 92% |
| SEER (Ns) in Average Conditions | 94 |
| Capacity Profile | XXL |
| Energy Efficiency Class for Space Heating | A |
| Energy Efficiency Class for Water Heating | A |
| Supplementary Electricity Consumption at Full Load (ELmax) | 0.045 kW |
| Useful Heat Output at Nominal Heat Output and High-Temperature Operation (P4) | 32 kW |
| Useful Efficiency at Nominal Heat Output and High-Temperature Operation (n4) | 88.3% |
| Supplementary Electricity Consumption in Standby Mode (Psb) | 0.002 kW |
| Standby Heat Loss (Pstby) | 0.038 kW |
| With Built-in Economizer | No |
| Heat Exchanger Material | Aluminum |
| Adjustable Heating Capacity | Yes |
| Tap Water Flow Threshold | 1.5 l/min |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | Yes |
| Gas Certification NZ | Yes |
| CW Label | 5 |
| Nominal Load Lower Value | 32.7 kW |
| Nominal Load Upper Value | 36.3 kW |
| Minimum Operating Pressure | 0.5 bar |
| Maximum Gas Supply Pressure | 30 mbar |
| Hot Water Capacity at 60°C | 9 l/min |
| Built-in Weather Dependent Controller | Yes |
| Built-in Expansion Vessel | No |
| Nominal Power 80-60°C | 32 kW |
| Maximum Flow Temperature (Operating Temperature) | 90°C |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| External Pipe Diameter (Flow) | 22 mm |
| External Pipe Diameter (Return) | 22 mm |
| Fuel Connection | Compression fitting |
| External Pipe Diameter (Fuel) | 15 mm |
| Air Supply Connection | End fitting |
| Nominal Channel Diameter (Air Supply) | 80 mm |
| Flue Gas Outlet Connection | End fitting |
| External Pipe Diameter (Cold Tap Water) | 15 mm |
| External Pipe Diameter (Hot Tap Water) | 15 mm |
| Condensation Connection | Flexible |
| External Pipe Diameter (Condensation) | 25.4 mm |
| Minimum Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gas Certification VR | No |
| Cold Tap Water Connection | Compression fitting |
| Hot Tap Water Connection | Compression fitting |
| Nominal Channel Diameter (Flue Gas Outlet) | 80 mm |
| Burner Control High/Low | No |
| Burner Control Modulating | Yes |
| Built-in Manometer | Yes |
| Gas Certification HR | Yes |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | No |
| Control Signal OpenTherm | Yes |
| Operation as Open Version (Air Supply) | Yes |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Suitable for Methane | No |
| Maximum Allowable Operating Pressure | 3 bar |
| Conversion Kit Required | Yes |
| Built-in Inlet Combination | No |
Our employee is happy to help you find the right product
Deliverytime