The Nefit TrendLine II is the first of a new generation of high-quality HR boilers. Reliable comfort, compact design, and "future-proof." Ready for different gases and ready to combine with a hybrid heat pump.
With the TrendLine boiler, you’re bringing the future into your home. The most advanced software of the moment automatically detects patterns in your hot water usage. This ensures the optimal balance between comfort and energy savings. Moreover, the TrendLine boiler is prepared for potential changes in the gas composition, and blending with biogas, for example, is possible.
The smart, self-learning software automatically ensures optimal comfort and maximum energy savings. Remote control via smartphone? That’s possible through the well-known Nefit Easy or Bosch EasyControl. The latter even makes it possible to control comfort in each room individually.
The TrendLine NxT is factory-made for compatibility with all common flue gas/exhaust systems, both parallel and concentric.
| Feature | Value |
|---|---|
| Brand | Nefit |
| Supplier Code | 7736700500 |
| EAN Code | 4054925226751 |
| Discount Group | 010 |
| Width | 440 mm |
| Height | 695 mm |
| Depth | 305 mm |
| Power Supply | 230 V |
| Flow Connection | Compression fitting |
| Return Connection | Compression fitting |
| Closed Version | Yes |
| Nominal Hot Water Power | 35.6 kW |
| Nominal Max Hot Water Power | 36 kW |
| Nominal Min Hot Water Power | 32.4 kW |
| Energy Efficiency for Water Heating | 95.2 % |
| Capacity Profile | XL |
| Heat Exchanger Material | Aluminium |
| Adjustable Heating Power | Yes |
| Hot Water Threshold | 1 l/min |
| Built-in Pump Control | Yes |
| Gas Certification VR/SV | Yes |
| Gas Certification NZ | Yes |
| CW Label | 5 |
| Gas Certification HR | 107 |
| Nominal Min Load | 30 kW |
| Nominal Max Load | 33.3 kW |
| Min Operating Pressure | 0.5 bar |
| Min Return Temperature | 7 °C |
| Max Gas Inlet Pressure | 30 mbar |
| Hot Water Capacity at 60°C | 10 l/min |
| Built-in Weather-Dependent Control | No |
| Built-in Expansion Tank | No |
| Hydraulic Resistance at dT 20°C | 19 kPa |
| Nominal Power 80-60°C | 29.5 kW |
| Max Flow Temperature (Operating Temperature) | 90°C |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| External Pipe Diameter (Flow) | 22 mm |
| External Pipe Diameter (Return) | 22 mm |
| Fuel Connection | Compression fitting |
| External Pipe Diameter (Fuel) | 15 mm |
| Nominal Channel Diameter (Air Intake) | 80 mm |
| External Pipe Diameter (Cold Tap Water) | 15 mm |
| External Pipe Diameter (Hot Tap Water) | 15 mm |
| Condensate Connection | Flexible |
| External Pipe Diameter (Condensate) | 22 mm |
| Min Gas Inlet Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Cold Tap Water Connection | Compression fitting |
| Hot Tap Water Connection | Compression fitting |
| Nominal Channel Diameter (Flue Gas) | 80 mm |
| Burner Control High/Low | Yes |
| Modulating Burner Control | Yes |
| Built-in Manometer | Yes |
| Gas Certification HR | Yes |
| Efficiency | 107 % |
| Pilot Flame | No |
| Second Return Connection | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | Yes |
| Open System Operation (Air Supply Possible) | Yes |
| Nominal Power 50-30°C | 31.5 kW |
| Suitable for Propane | Yes |
| Suitable for Butane | No |
| Max Allowable Operating Pressure | 3 bar |
| Hot Water Stock | 0.5 l |
| Conversion Kit Required | Yes |
| Built-in Intake Combination | No |
