Do you have a question about this product?
Our employee is happy to help you find the right product
With the Remeha Avanta Ace Combi Comfort System, you bring home the best combination of ultimate heating comfort and energy savings. This smart combination of a high-quality HR boiler and an intelligent eTwist thermostat is perfectly matched to ensure optimal performance.
The Avanta Ace is a high-quality combi boiler that provides years of reliable heating and generous hot water supply. Built with standard components, it allows for quick and easy installation and maintenance. The proven components ensure the well-known Remeha reliability.
✔ Easy to install
✔ Service-friendly
✔ Standard well-equipped
✔ Proven components
✔ eSMART Inside
✔ Future-ready
Note: This version features an eccentric flue gas outlet.
The eTwist is a modulating room thermostat that efficiently controls the heating and cooling system. It connects to the unit via cable but can also be linked to the internet via WiFi, allowing remote control through a mobile app.
Feature | Value |
---|---|
Brand | Remeha |
Supplier Code | 7768363 |
EAN Code | 8713809340377 |
Discount Group | 005 |
Width | 395 mm |
Height | 700 mm |
Depth | 285 mm |
Number of Phases | 1 |
Material Quality | Other |
Flow/Return Connection | Compression (Knel) |
Nominal Voltage | 196 - 253 V |
Frequency | 50 Hz |
Closed System | Yes |
Nominal Hot Water Capacity | 28 kW |
Nominal Load (Higher Calorific Value) Hot Water | 32.08 kW |
Nominal Load (Lower Calorific Value) Hot Water | 28.9 kW |
Water Heating Efficiency (Nwh) | 85 % |
SEER (Ns) at Average Conditions | 96 |
SEER (Ns) at Colder Conditions | 97.8 |
SEER (Ns) at Warmer Conditions | 88 |
Capacity Profile | XL |
Energy Efficiency Class Heating | A |
Energy Efficiency Class Hot Water | A |
Nominal Hot Water Diameter | DN 15 |
Additional Power Consumption at Full Load (ELmax) | 0.033 kW |
Useful Heat Output at High Temperature (P4) | 24 kW |
Efficiency at High Temperature (n4) | 88 % |
Additional Power Consumption in Standby (Psb) | 0.004 kW |
Standby Heat Loss (Pstby) | 0.04 kW |
Built-in Heat Exchanger (Economiser) | Yes |
Energy Efficiency Heating | 96 % |
Hot Water Flow Rate (EN 13203-1) | 13.4 l/min |
Heat Exchanger Material | Stainless Steel (RVS) |
Adjustable Heating Power | Yes |
Nominal Cold Water Diameter | DN 15 |
Tap Threshold | 1.2 l/min |
Built-in Pump Control | Yes |
Gaskeur VR/SV | No |
Gaskeur NZ | Yes |
Min. Operating Pressure | 0.5 bar |
Min. Return Temperature | 20 °C |
Max. Gas Inlet Pressure | 30 mbar |
Hot Water Capacity at 60 °C | 8 l/min |
Built-in Weather-Dependent Controller | Yes |
Built-in Expansion Vessel | No |
Water-Side Resistance at ΔT 20 °C | 24 kPa |
Nominal Power (80-60 °C / 50-30 °C) | 24 kW / 26.1 kW |
Max. Flow Temperature | 80 °C |
Built-in Filling/Drain Valve | No |
Built-in Pressure Relief Valve | Yes |
External Pipe Diameter Flow/Return | 22 mm |
Fuel Connection | Compression (Knel) |
External Pipe Diameter Fuel | 15 mm |
Air Supply Connection | Push-Fit |
Nominal Air Supply Diameter | 80 mm |
Flue Gas Outlet Connection | Push-Fit |
External Pipe Diameter Cold/Hot Water | 15 mm |
Condensate Drain Connection | Other |
External Pipe Diameter Condensate | 21.8 mm |
Min. Gas Inlet Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gaskeur VR | No |
Flue Gas Nominal Diameter | 80 mm |
Burner Control (H/L, Modulating) | No / Yes |
Built-in Manometer | Yes |
Condensing Technology | Yes |
Gaskeur HR | Yes |
Efficiency | 97.7 % |
Pilot Flame | No |
Second Return Connection | No |
Control Signal (On/Off, H/L, 0-10V, OpenTherm) | Yes / No / Yes / Yes |
Operation as Open System Possible | Yes |
Suitable for Propane/Butane/Methane | Yes / No / Yes |
Max. Operating Pressure | 3 bar |
Hot Water Storage | 1 l |
Nominal Condensate Diameter | DN 25 |
Conversion Kit Required | No |
Built-in Inlet Combination | No |
CW Label | 4 |
Gaskeur HR/NZ | Yes / Yes |
Our employee is happy to help you find the right product
Deliverytime