The Remeha Avanta Ace is a high-quality combination boiler that ensures years of reliable and comfortable heating, along with ample hot water supply. This modern boiler is built using standard components, making installation and maintenance quick and easy. Additionally, its proven components provide the well-known reliability of a Remeha boiler.
✔ Easy installation
✔ Service-friendly
✔ Fully equipped as standard
✔ Proven components
✔ eSMART Inside
✔ Ready for the future
Note! This model comes with a concentric flue gas outlet.
Feature | Value |
---|---|
Brand | Remeha |
Supplier Code | 7768358 |
EAN Code | 8713809340322 |
Category | 005 |
Dimensions (W x H x D) | 395 mm x 700 mm x 285 mm |
Number of Phases | 1 |
Material Quality | Other |
Flow/Return Connection | Compression Fittings (Knel) |
Nominal Voltage | 196 - 230 V |
Frequency | 50 Hz |
Sealed System | Yes |
Nominal Hot Water Power | 35 kW |
Nominal Load (upper/lower heating value for hot water) | 39.96 kW / 36 kW |
Water Heating Energy Efficiency (Nwh) | 85 % |
SEER (Ns) under medium/cold/warm conditions | 93 / 97.8 / 88.1 |
Capacity Profile | XL |
Energy Efficiency Class (Heating) | A |
Energy Efficiency Class (Hot Water) | A |
Nominal Diameter Hot Water | DN 15 |
Supplementary Power Consumption at Full Load (ELmax) | 0.048 kW |
Useful Heat Output at High Temperature (P4) | 30 kW |
Efficiency at High Temperature (n4) | 88.1 % |
Standby Power Consumption (Psb) | 0.004 kW |
Standby Heat Loss (Pstby) | 0.04 kW |
Built-in Economiser | Yes |
Heating Energy Efficiency | 93 % |
Hot Water Flow Rate (EN 13203-1) | 16.7 l/min |
Heat Exchanger Material | Stainless Steel (RVS) |
Adjustable Heating Power | Yes |
Nominal Diameter Cold Water | DN 15 |
Tap Threshold | 1.2 l/min |
Integrated Pump Control | Yes |
Gaskeur VR/SV | No |
Gaskeur NZ | Yes |
Min./Max. Operating Pressure | 0.5 bar / 3 bar |
Min. Return Temperature | 20 °C |
Max. Gas Inlet Pressure | 30 mbar |
Hot Water Capacity at 60 °C | 10.3 l/min |
Built-in Weather-Dependent Controller | Yes |
Integrated Expansion Vessel | No |
Water Resistance at ΔT 20 °C | 27 kPa |
Nominal Power (80-60 °C / 50-30 °C) | 30 kW / 32.5 kW |
Max. Flow Temperature | 80 °C |
Built-in Fill/Drain Valve | No |
Built-in Overpressure Valve | Yes |
External Pipe Diameter Flow/Return | 22 mm |
Fuel Connection | Compression Fittings (Knel) |
External Pipe Diameter Fuel | 15 mm |
Air Intake Connection | Push-Fit Connection |
Nominal Channel Diameter Air Intake | 100 mm |
Flue Gas Outlet Connection | Push-Fit Connection |
External Pipe Diameter Cold/Hot Water | 15 mm |
Condensate Drain Connection | Other |
External Pipe Diameter Condensate | 21.8 mm |
Min. Gas Inlet Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gaskeur VR | No |
Cold/Hot Water Connection | Compression Fittings (Knel) |
Nominal Channel Diameter Flue Gas | 60 mm |
Burner Control (High/Low, Modulating) | No / Yes |
Built-in Manometer | Yes |
Condensing Technology | Yes |
Gaskeur HR | Yes |
Efficiency | 97.8 % |
Pilot Flame | No |
Second Return Connection | No |
Control Signal (On/Off, High/Low, 0-10V, OpenTherm) | Yes / No / Yes / Yes |
Operation as Open System (Air Intake) | Yes |
Suitable for Propane/Butane/Methane | Yes / No / Yes |
Max. Allowable Operating Pressure | 3 bar |
Hot Water Storage | 1 l |
Nominal Condensate Diameter | DN 25 |
Conversion Kit Required | No |
Integrated Inlet Combination | No |
CW Label | 5 |
Gaskeur HR/NZ | Yes / Yes |