With the Remeha Avanta Ace Combi Comfort System, you get the perfect combination of ultimate heating comfort and energy savings at home. This smart combination of a high-quality HR boiler and an intelligent eTwist thermostat is perfectly matched to ensure optimal performance.
The Avanta Ace is a high-quality combi boiler that provides years of reliable heating and generous hot water supply. The modern boiler is built using standardized components, allowing for quick and easy installation and maintenance. Additionally, the proven components ensure the well-known reliability of a Remeha boiler.
✔ Easy to install
✔ Easy to service
✔ Standard comprehensive equipment
✔ Proven components
✔ eSMART Inside
✔ Future-ready
Note: This model comes with a concentric flue system.
The eTwist is designed as a modulating room thermostat that efficiently controls the heating and cooling system. It has a wired connection to the device but can also be connected to the internet via WiFi, allowing it to be controlled remotely using an app on a mobile device.
| Feature | Value |
|---|---|
| Brand | Remeha |
| Supplier Code | 7768360 |
| EAN Code | 8713809340346 |
| Discount Group | 005 |
| Width | 395 mm |
| Height | 700 mm |
| Depth | 285 mm |
| Number of Phases | 1 |
| Material Quality | Other |
| Flow/Return Connection | Compression fitting |
| Nominal Voltage | 196 - 253 V |
| Frequency | 50 Hz |
| Closed System | Yes |
| Nominal Hot Water Power | 35 kW |
| Nominal Heating Value Load Hot Water | 39.96 kW |
| Nominal Calorific Value Load Hot Water | 36 kW |
| Water Heating Efficiency (Nwh) | 85 % |
| SEER (Ns) – Average Conditions | 96 |
| SEER (Ns) – Cold Conditions | 97.8 |
| SEER (Ns) – Warm Conditions | 88.1 |
| Capacity Profile | XL |
| Energy Class – Space Heating | A |
| Energy Class – Water Heating | A |
| Nominal Hot Water Diameter | DN 15 |
| Max Additional Power Consumption (ELmax) | 0.048 kW |
| Useful Heat Output at High Temp (P4) | 30 kW |
| Efficiency at High Temp (n4) | 88.1 % |
| Standby Power Consumption (Psb) | 0.004 kW |
| Standby Heat Loss (Pstby) | 0.04 kW |
| Built-in Economiser | Yes |
| Energy Efficiency – Space Heating | 96 % |
| Hot Water Flow Rate (EN 13203-1) | 16.7 l/min |
| Heat Exchanger Material | Stainless Steel (RVS) |
| Adjustable Heating Power | Yes |
| Nominal Cold Water Diameter | DN 15 |
| Tap Threshold | 1.2 l/min |
| Integrated Pump Control | Yes |
| Gaskeur VR/SV | No |
| Gaskeur NZ | Yes |
| Min. Operating Pressure | 0.5 bar |
| Min. Return Temperature | 20 °C |
| Max. Gas Supply Pressure | 30 mbar |
| Hot Water Capacity at 60 °C | 10.3 l/min |
| Integrated Weather-Dependent Control | Yes |
| Integrated Expansion Vessel | No |
| Hydraulic Resistance at ΔT 20 °C | 27 kPa |
| Nominal Power (80-60 °C / 50-30 °C) | 30 kW / 32.5 kW |
| Max. Flow Temperature | 80 °C |
| Max. Operating Pressure | 3 bar |
| Integrated Fill/Drain Valve | No |
| Integrated Pressure Relief Valve | Yes |
| External Pipe Diameter – Flow/Return | 22 mm |
| Fuel Connection | Compression fitting |
| External Pipe Diameter – Fuel | 15 mm |
| Air Supply Connection | Push-fit |
| Nominal Air Supply Channel Diameter | 100 mm |
| Flue Gas Outlet Connection | Push-fit |
| External Pipe Diameter – Cold/Hot Water | 15 mm |
| Condensate Connection | Other |
| External Pipe Diameter – Condensate | 21.8 mm |
| Min. Gas Supply Pressure | 20 mbar |
| Suitable for Natural Gas | Yes |
| Gaskeur VR | No |
| Nominal Flue Gas Channel Diameter | 60 mm |
| Burner Control High/Low | No |
| Burner Control Modulating | Yes |
| Integrated Pressure Gauge | Yes |
| Condensing Boiler | Yes |
| Gaskeur HR | Yes |
| Efficiency | 97.8 % |
| Pilot Flame | No |
| Control Signal On/Off | Yes |
| Control Signal 0-10V / OpenTherm | Yes / Yes |
| Operation as Open System Possible | Yes |
| Suitable for Propane / Butane / Methane | Yes / No / Yes |
| CW Label | 5 |
| Gaskeur HR/NZ | Yes / Yes |
