The Remeha Avanta Ace is a high-quality combi boiler that ensures years of reliable supply of comfortable heating and ample hot water consumption. The modern boiler is built from standard components, ensuring that the new boiler is quick and easy to install and maintain. Additionally, the proven components guarantee the user the well-known reliability of a Remeha boiler.
Technical Specifications
Feature | Value |
---|---|
Brand | Remeha |
Supplier Code | 7768362 |
EAN Code | 8713809340360 |
Discount Group | 005 |
Width | 395 mm |
Height | 700 mm |
Depth | 285 mm |
Number of Phases | 1 |
Material Quality | Other |
Supply Connection | Compression |
Return Connection | Compression |
Nominal Voltage | 196 - 253 V |
Frequency | 50 Hz |
Closed Design | Yes |
Nominal Output for Hot Water | 35 kW |
Nominal Upper Hot Water Load | 39.96 kW |
Nominal Lower Hot Water Load | 36 kW |
Energy Efficiency of Water Heating (Nwh) | 85 % |
SEER (Ns) under average conditions | 93 |
SEER (Ns) under cooler conditions | 97.8 |
SEER (Ns) under warmer conditions | 88.1 |
Capacity Profile | XL |
Energy Efficiency Class for Space Heating | A |
Energy Efficiency Class for Water Heating | A |
Nominal Diameter for Hot Water | DN 15 |
Supplementary Power Consumption at Full Load (ELmax) | 0.048 kW |
Useful Heat Output at Nominal Heat Output and Operation at High Temperature (P4) | 30 kW |
Useful Efficiency at Nominal Heat Output and Operation at High Temperature (n4) | 88.1 % |
Supplementary Power Consumption in Standby Mode (Psb) | 0.004 kW |
Standby Heat Loss (Pstby) | 0.04 kW |
With Built-in Economizer | Yes |
Energy Efficiency for Space Heating | 93 % |
Hot Water Flow Rate according to EN 13203-1 | 16.7 l/min |
Heat Exchanger Material | Stainless Steel (RVS) |
Adjustable Heating Capacity | Yes |
Nominal Diameter for Cold Water | DN 15 |
Flow Threshold | 1.2 l/min |
Built-in Pump Switch | Yes |
Gas Certification VR/SV | No |
Gas Certification NZ | Yes |
Nominal Lower Load | 36 kW |
Nominal Upper Load | 39.96 kW |
Minimum Operating Pressure | 0.5 bar |
Minimum Return Temperature | 20 °C |
Maximum Gas Supply Pressure | 30 mbar |
Hot Water Capacity at 60 °C | 10.3 l/min |
Built-in Weather Dependent Regulator | Yes |
Built-in Expansion Vessel | No |
Hydraulic Resistance at ΔT 20 °C | 27 kPa |
Nominal Output 80-60 °C | 30 kW |
Maximum Supply Temperature (Operating Temperature) | 80 °C |
Maximum Operating Pressure | 3 bar |
Built-in Filling/Drain Valve | No |
Built-in Pressure Relief Valve | Yes |
External Pipe Diameter for Supply | 22 mm |
External Pipe Diameter for Return | 22 mm |
Fuel Connection | Compression |
External Pipe Diameter for Fuel | 15 mm |
Air Supply Connection | Push-in End |
Nominal Channel Diameter for Air Supply | 80 mm |
Flue Gas Connection | Push-in End |
External Pipe Diameter for Cold Water | 15 mm |
External Pipe Diameter for Hot Water | 15 mm |
Condensate Connection | Other |
External Pipe Diameter for Condensate | 21.8 mm |
Minimum Gas Supply Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gas Certification VR | No |
Cold Water Connection | Compression |
Hot Water Connection | Compression |
Nominal Channel Diameter for Flue Gas | 80 mm |
Burner Control High/Low | No |
Modulating Burner Control | Yes |
Built-in Manometer | Yes |
Condensing | Yes |
Gas Certification HR | Yes |
Efficiency | 97.8 % |
Pilot Flame | No |
Second Return Connection | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | Yes |
Control Signal OpenTherm | Yes |
Operation as Open Version (Air Supply) Possible | Yes |
Nominal Output 50-30 °C | 32.5 kW |
Suitable for Propane | Yes |
Suitable for Butane | No |
Suitable for Methane | Yes |
Maximum Allowable Operating Pressure | 3 bar |
Nominal Diameter for Supply | Other |
Nominal Diameter for Return | Other |
Nominal Diameter for Fuel | DN 15 |
Hot Water Storage | 1 l |
Nominal Diameter for Condensate | DN 25 |
Conversion Kit Required | No |
Built-in Inlet Combination | No |
CW Label | 5 |
Gas Certification HR | Yes |
Gas Certification NZ | Yes |