Do you have a question about this product?
Our employee is happy to help you find the right product
The intelligent Calenta Ace is ready for the (digital) future thanks to the new device control (eSmart Inside). The Calenta Ace boiler features brass hydro blocks. The heat exchanger used in the Calenta Ace is treated with a surface coating, eliminating the need for physical cleaning. The installation of this boiler is easy, as the mounting bracket has an integrated spirit level.
The system can be optionally expanded with a (semi)-automatic refill unit, which allows the system to be automatically and intelligently refilled through the boiler's control panel, the eTwist, or via the handy eTwist app.
Technical Specifications:
Feature | Value |
---|---|
Brand | Remeha |
Supplier Code | 7649957 |
EAN Code | 8713809288211 |
Width | 450 mm |
Height | 690 mm |
Depth | 450 mm |
Power Supply | 230 V |
Number of Phases | 1 |
Energy Efficiency Class | A |
Material Quality | Other |
Flow Connection | Compression |
Return Connection | Compression |
Frequency | 50 Hz |
Connection Voltage | 196 - 253 V |
Closed Model | Yes |
SEER (Ns) in Average Conditions | 94 |
SEER (Ns) in Cooler Conditions | 99.2 |
SEER (Ns) in Warmer Conditions | 89.4 |
Additional Power Consumption at Full Load (ELmax) | 0.04 kW |
Useful Heat Output at Nominal Heat Output and High-Temperature Operation (P4) | 24.8 kW |
Efficiency at Nominal Heat Output and High-Temperature Operation (n4) | 89.4% |
Supplementary Power Consumption in Standby Mode (Psb) | 0 kW |
Standby Heat Loss (Pstby) | 0.078 kW |
Max Hydrogen Percentage in Mix with NAT Gas | 20% |
Suitable for Low-Calorific Natural Gas | Standard factory setting |
Suitable for High-Calorific Natural Gas | Adjustable manually |
Suitable for Propane | Requires conversion kit (not included) |
Suitable for Butane | Not suitable |
Suitable for Methane | Adjustable manually |
Suitable for LPG | Not suitable |
Suitable for Hydrogen | Adjustable manually |
Heat Exchanger Material | Aluminum |
Built-in Pump Switching | Yes |
Gas Certification VR/SV | Yes |
Gas Certification NZ | Yes |
Nominal Load Lower Value | 25 kW |
Nominal Load Upper Value | 27.8 kW |
Minimum Operating Pressure | 0.8 bar |
Minimum Return Temperature | 20 °C |
Maximum Gas Inlet Pressure | 30 mbar |
Built-in Weather-Dependent Controller | Yes |
Built-in Expansion Vessel | No |
Water Side Resistance at ΔT 20 °C | 35 kPa |
Nominal Power 80-60 °C | 24.8 kW |
Maximum Flow Temperature (Operating Temperature) | 90 °C |
Maximum Operating Pressure | 3 bar |
Built-in Filling/Drain Valve | No |
Built-in Pressure Relief Valve | Yes |
External Pipe Diameter Flow | 22 mm |
External Pipe Diameter Return | 22 mm |
Fuel Connection | Other |
External Pipe Diameter Fuel | 15 mm |
Air Supply Connection | Push-in end |
Nominal Pipe Diameter Air Supply | 80 mm |
Flue Gas Outlet Connection | Push-in end |
Condensate Connection | Other |
External Pipe Diameter Condensate | 25 mm |
Minimum Gas Inlet Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gas Certification VR | No |
Nominal Pipe Diameter Flue Gas Outlet | 80 mm |
Burner Control High/Low | No |
Modulating Burner Control | Yes |
External Pipe Diameter Expansion Connection | 0 mm |
Built-in Manometer | Yes |
Condensing | Yes |
Gas Certification HR | Yes |
Efficiency | 107% |
Pilot Flame | No |
Second Return Connection | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | Yes |
Control Signal OpenTherm | Yes |
Operation as Open Unit (Air Supply Possible) | Yes |
Nominal Power 50-30 °C | 25.5 kW |
Suitable for Propane | Yes |
Suitable for Butane | No |
Suitable for Methane | Yes |
Maximum Allowed Operating Pressure | 3 bar |
Nominal Flow Diameter | Other |
Nominal Return Diameter | Other |
Nominal Fuel Diameter | Other |
Nominal Condensate Diameter | DN 25 |
Conversion Kit Required | Yes |
Gas Certification HR | Yes |
Gas Certification NZ | No |
Our employee is happy to help you find the right product
Deliverytime