The new standard in performance and reliability
The Quinta is a model of innovation, without losing sight of the solid foundation of proven technology. Thanks to the reliable heat exchanger, which was already successfully applied in the Quinta Ace, this boiler offers a familiar foundation. This not only ensures reliable operation but also provides recognizable elements for the installer.
Note: The Remeha Quinta can be used in combination with hot water cylinders. For outputs above 45 kW, a double separation wall is required for boilers according to the VEWIN water work sheets.
Technical Specifications
Feature | Value |
---|---|
Brand | Remeha |
Supplier Code | 7843853 |
EAN Code | 8713809373238 |
Discount Group | 005 |
Width | 500 mm |
Height | 750 mm |
Depth | 476 mm |
Number of Phases | 1 |
Energy Efficiency Class | A |
Material Quality | Other |
Flow Connection | External thread |
Return Connection | External thread |
Frequency | 50 Hz |
Closed Version | Yes |
SEER (Ns) under warmer conditions | 93 |
Supplementary Power Consumption at Full Load (ELmax) | 0.071 kW |
Useful Heat Output at Nominal Output and High Temperature Operation (P4) | 40 kW |
Useful Efficiency at Nominal Output and High Temperature Operation (n4) | 87.5% |
Supplementary Power Consumption in Standby Mode (Psb) | 0.004 kW |
Standby Heat Loss (Pstby) | 0.101 kW |
Max. Percentage of Hydrogen in Natural Gas Mix | 20% |
Suitable for Low-Calorific Natural Gas | Standard factory setting |
Suitable for High-Calorific Natural Gas | Manually adjustable |
Suitable for Propane | Via conversion kit, not included |
Suitable for Butane | Not suitable |
Suitable for Methane | Standard factory setting |
Suitable for LPG | Not suitable |
Suitable for Hydrogen | Standard factory setting |
Heat Exchanger Material | Aluminium |
Built-in Pump Control | No |
Nominal Load Lower Value | 8.2 kW |
Nominal Load Upper Value | 41.2 kW |
Min. Operating Pressure | 0.8 bar |
Max. Gas Supply Pressure | 30 mbar |
Built-in Weather-Dependent Regulator | No |
Built-in Expansion Vessel | No |
Hydraulic Resistance at dT 20 °C | 11.4 kPa |
Nominal Power 80-60 °C | 40.8 kW |
Max. Flow Temperature (Operating Temperature) | 90 °C |
Max. Operating Pressure | 4 bar |
Built-in Fill/Drain Valve | No |
Built-in Pressure Relief Valve | No |
Fuel Connection | External thread |
Nominal Channel Diameter Air Supply | 100 mm |
Flue Gas Connection | Push-fit |
Condensate Connection | Flexible |
Min. Gas Supply Pressure | 20 mbar |
Burner Control High/Low | No |
Modulating Burner Control | Yes |
Built-in Manometer | Yes |
Condensing | Yes |
Efficiency | 97.2% |
Pilot Flame | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | Yes |
Control Signal OpenTherm | Yes |
Open Operation (Air Supply) Possible | Yes |
Nominal Power 50-30 °C | 42.4 kW |
Nominal Flow Diameter | 1 1/4" (32) |
Nominal Return Diameter | 1 1/4" (32) |
Nominal Fuel Diameter | 3/4" (20) |
Nominal Condensate Diameter | Other |