Do you have a question about this product?
Our employee is happy to help you find the right product
The Quinta is a model of innovation, without losing sight of the solid foundation of proven technology. Thanks to the reliable heat exchanger, which was successfully used in the Quinta Ace, this boiler offers a familiar base. This ensures not only reliable operation but also recognizable elements for the installer.
Note: The Remeha Quinta is applicable in combination with hot water cylinders. For outputs above 45 kW, a double separating wall is required for boilers according to VEWIN water work sheets.
Technical Specifications
| Feature | Value |
|---|---|
| Brand | Remeha |
| Supplier Code | 7843854 |
| EAN Code | 8713809373245 |
| Discount Group | 005 |
| Width | 500 mm |
| Height | 750 mm |
| Depth | 476 mm |
| Number of Phases | 1 |
| Energy Efficiency Class | A |
| Inlet Connection | External thread |
| Return Connection | External thread |
| Frequency | 50 Hz |
| Closed Construction | Yes |
| SEER (Ns) in warmer conditions | 93 |
| Supplementary Power Consumption at Full Load (ELmax) | 0.083 kW |
| Useful Heat Output at Nominal Heat Output and Operation at High Temperature (P4) | 60.9 kW |
| Useful Efficiency at Nominal Heat Output and Operation at High Temperature (n4) | 88.5 % |
| Supplementary Power Consumption in Standby Mode (Psb) | 0.004 kW |
| Standby Heat Loss (Pstby) | 0.11 kW |
| Max. Percentage of Hydrogen in NAT Gas Mixture | 20 % |
| Suitable for Low Calorific Gas | Standard factory setting |
| Suitable for High Calorific Gas | Manually adjustable |
| Suitable for Propane | With a conversion kit, not included |
| Suitable for Butane | Not suitable |
| Suitable for Methane | Standard factory setting |
| Suitable for LPG | Not suitable |
| Suitable for Hydrogen | Standard factory setting |
| Heat Exchanger Material | Aluminium |
| Built-in Pump Control | No |
| Nominal Load Lower Value | 12.2 kW |
| Nominal Load Upper Value | 62 kW |
| Min. Operating Pressure | 0.8 bar |
| Max. Gas Inlet Pressure | 30 mbar |
| Built-in Weather-Dependent Controller | No |
| Built-in Expansion Vessel | No |
| Hydraulic Resistance at dT 20 °C | 16.3 kPa |
| Nominal Output 80-60 °C | 61.5 kW |
| Max. Supply Temperature (Operating Temperature) | 90 °C |
| Max. Operating Pressure | 4 bar |
| Built-in Fill/Drain Valve | No |
| Built-in Pressure Relief Valve | No |
| Fuel Connection | External thread |
| Nominal Channel Diameter Air Supply | 100 mm |
| Flue Gas Connection | Push-fit |
| Condensate Connection | Flexible |
| Min. Gas Inlet Pressure | 20 mbar |
| Burner Control High/Low | No |
| Modulating Burner Control | Yes |
| Built-in Manometer | Yes |
| Condensing | Yes |
| Efficiency | 98.3 % |
| Pilot Flame | No |
| Control Signal On/Off | Yes |
| Control Signal High/Low | No |
| Control Signal 0-10V | Yes |
| Control Signal OpenTherm | Yes |
| Operation as Open Type (Air Supply) Possible | Yes |
| Nominal Output 50-30 °C | 65 kW |
| Nominal Diameter Supply | 1 1/4" (32) |
| Nominal Diameter Return | 1 1/4" (32) |
| Nominal Diameter Fuel | 3/4" (20) |
| Nominal Diameter Condensate | Other |
Our employee is happy to help you find the right product
