| Brand |
Remeha |
| Supplier Code |
7683600 |
| EAN Code |
8713809304461 |
| Discount Group |
005 |
| Width |
500 mm |
| Height |
750 mm |
| Depth |
500 mm |
| Voltage |
230 V |
| Number of Phases |
1 |
| Material Quality |
Other |
| Supply Connection |
External thread |
| Return Connection |
External thread |
| Frequency |
50 Hz |
| Connection Voltage |
196 - 253 V |
| Closed Version |
Yes |
| SEER (Ns) at cooler conditions |
97.3 |
| SEER (Ns) at warmer conditions |
87.5 |
| Supplementary Electricity Consumption at Full Load (ELmax) |
0.232 kW |
| Useful Heat Output at Nominal Heat Output and Operation at High Temperature (P4) |
107 kW |
| Efficiency at Nominal Heat Output and Operation at High Temperature (n4) |
87.5% |
| Supplementary Electricity Consumption in Standby Mode (Psb) |
0.006 kW |
| Standby Heat Loss (Pstby) |
0.123 kW |
| Max. Hydrogen Percentage in Mixing with NAT Gas |
20% |
| Suitable for Low Calorific Value Natural Gas |
Standard factory setting |
| Suitable for High Calorific Value Natural Gas |
Manually adjustable |
| Suitable for Propane |
With conversion kit, not included |
| Suitable for Butane |
Not suitable |
| Suitable for Methane |
Standard factory setting |
| Suitable for LPG |
Not suitable |
| Suitable for Hydrogen |
Standard factory setting |
| Heat Exchanger Material |
Aluminum |
| Built-in Pump Switch |
Yes |
| Gas Approval VR/SV |
No |
| Gas Approval NZ |
No |
| Nominal Load Lower Limit |
107 kW |
| Nominal Load Upper Limit |
45,600 kW |
| Min. Operating Pressure |
0.8 bar |
| Min. Return Temperature |
20 °C |
| Built-in Weather-dependent Regulator |
No |
| Built-in Expansion Vessel |
No |
| Hydraulic Resistance at dT 20 °C |
25 kPa |
| Nominal Power 80-60 °C |
103.9 kW |
| Max. Supply Temperature (Operating Temperature) |
90 °C |
| Built-in Fill/Drain Valve |
No |
| Built-in Overpressure Valve |
No |
| External Pipe Diameter Supply |
31.75 mm |
| External Pipe Diameter Return |
31.75 mm |
| Fuel Connection |
External thread |
| External Pipe Diameter Fuel |
19.05 mm |
| Air Supply Connection |
Push-fit end |
| Nominal Air Supply Pipe Diameter |
80 mm |
| Flue Gas Pipe Connection |
Push-fit end |
| Condensate Connection |
Flexible |
| External Pipe Diameter Condensate |
25 mm |
| Suitable for Natural Gas |
Yes |
| Gas Approval VR |
No |
| Nominal Flue Gas Pipe Diameter |
100 mm |
| Burner Control High/Low |
No |
| Burner Control Modulating |
Yes |
| External Pipe Diameter Expansion Connection |
0 mm |
| Built-in Manometer |
Yes |
| Condensing |
Yes |
| Gas Approval HR |
Yes |
| Efficiency |
107% |
| Pilot Flame |
No |
| Second Return Connection |
No |
| Control Signal On/Off |
Yes |
| Control Signal High/Low |
No |
| Control Signal 0-10V |
Yes |
| Control Signal OpenTherm |
Yes |
| Operation as Open Version (Air Supply) Possible |
Yes |
| Nominal Power 50-30 °C |
109.7 kW |
| Suitable for Propane |
Yes |
| Suitable for Butane |
No |
| Suitable for Methane |
Yes |
| Max. Permissible Operating Pressure |
4 bar |
| Nominal Supply Diameter |
1 1/4" (32) |
| Nominal Return Diameter |
1 1/4" (32) |
| Nominal Fuel Diameter |
3/4" (20) |
| Nominal Condensate Diameter |
DN 25 |
| Conversion Kit Required |
No |
| Gas Approval HR |
Yes |
| Gas Approval NZ |
No |
