| Brand |
Remeha |
| Supplier Code |
7683599 |
| EAN Code |
8713809304454 |
| Discount Group |
005 |
| Width |
500 mm |
| Height |
750 mm |
| Depth |
500 mm |
| Power Supply |
230 V |
| Number of Phases |
1 |
| Material Quality |
Other |
| Flow Connection |
External thread |
| Return Connection |
External thread |
| Frequency |
50 Hz |
| Connection Voltage |
196 - 253 V |
| Closed Construction |
Yes |
| SEER (Ns) in cooler conditions |
97.4 |
| SEER (Ns) in warmer conditions |
88.2 |
| Additional Power Consumption at Full Load (ELmax) |
0.114 kW |
| Useful Heat Output at Nominal Heat Output and Operation at High Temperature (P4) |
84.2 kW |
| Useful Efficiency at Nominal Heat Output and Operation at High Temperature (n4) |
88.2% |
| Additional Power Consumption in Standby Mode (Psb) |
0.007 kW |
| Standby Heat Loss (Pstby) |
0.123 kW |
| Max. Hydrogen Percentage in Mixture with NAT Gas |
20% |
| Suitable for Low Calorific Value Natural Gas |
Standard Factory Setting |
| Suitable for High Calorific Value Natural Gas |
Manually Adjustable |
| Suitable for Propane |
With Conversion Kit, not included |
| Suitable for Butane |
Not suitable |
| Suitable for Methane |
Standard Factory Setting |
| Suitable for LPG |
Not suitable |
| Suitable for Hydrogen |
Standard Factory Setting |
| Heat Exchanger Material |
Aluminum |
| Integrated Pump Switching |
Yes |
| Gas Approval VR/SV |
No |
| Gas Approval NZ |
No |
| Nominal Load Lower Value |
86 kW |
| Nominal Load Upper Value |
92.5 kW |
| Min. Operating Pressure |
0.8 bar |
| Min. Return Temperature |
20 °C |
| Integrated Weather-Dependent Controller |
No |
| Integrated Expansion Vessel |
No |
| Hydraulic Resistance at ΔT 20 °C |
15.3 kPa |
| Nom. Power 80-60 °C |
84.2 kW |
| Max. Flow Temperature (Operating Temperature) |
90 °C |
| Integrated Fill/Drain Valve |
No |
| Integrated Overpressure Valve |
No |
| External Pipe Diameter Flow |
31.75 mm |
| External Pipe Diameter Return |
31.75 mm |
| Fuel Connection |
External thread |
| External Pipe Diameter Fuel |
19.05 mm |
| Air Supply Connection |
Push-fit |
| Nom. Duct Diameter Air Supply |
80 mm |
| Flue Gas Connection |
Push-fit |
| Condensate Connection |
Flexible |
| External Pipe Diameter Condensate |
25 mm |
| Suitable for Natural Gas |
Yes |
| Gas Approval VR |
No |
| Nom. Duct Diameter Flue Gas |
100 mm |
| Burner Control High/Low |
No |
| Modulating Burner Control |
Yes |
| External Pipe Diameter Expansion Connection |
0 mm |
| Integrated Manometer |
Yes |
| Condensing |
Yes |
| Gas Approval HR |
Yes |
| Efficiency |
107% |
| Pilot Flame |
No |
| Second Return Connection |
No |
| Control Signal On/Off |
Yes |
| Control Signal High/Low |
No |
| Control Signal 0-10V |
Yes |
| Control Signal OpenTherm |
Yes |
| Operation as Open Construction (Air Supply) Possible |
Yes |
| Nom. Power 50-30 °C |
89.5 kW |
| Suitable for Propane |
Yes |
| Suitable for Butane |
No |
| Suitable for Methane |
Yes |
| Max. Allowed Operating Pressure |
4 bar |
| Nom. Pipe Diameter Flow |
1 1/4" (32) |
| Nom. Pipe Diameter Return |
1 1/4" (32) |
| Nom. Pipe Diameter Fuel |
3/4" (20) |
| Nom. Pipe Diameter Condensate |
DN 25 |
| Conversion Kit Required |
No |
| Gas Approval HR |
Yes |
| Gas Approval NZ |
No |
