This product does not fall under the European F-gas regulation, which means that commissioning may also be carried out by companies without an F-gas certification.

Silent mode:
With the Silent Mode function enabled (compressor on), it reaches a maximum of 30 dB(A).

Sync power system:
The new Twin Rotary compressor and advanced electronics are synchronized for the greatest acoustic comfort, under all operating conditions.

Maximum efficiency
Thanks to the new compressor and the optimization of all components, Unico Evo achieves energy efficiency class A+ in cooling.

Technical data:

• Cooling capacity (min/max): 1.0 / 2.3 kW
• Heating power (min/max): 1.0 / 2.2 kW
• Nominal cooling capacity (1) Prated: 1.7 kW
• Nominal heating capacity (1) Prated: 1.5 kW
• Nominal power consumption during cooling (1) PEER: 0.5 kW
• Nominal power during cooling (1): 4.7 A
• Nominal power consumption during heating (1) PCOP: 0.4 kW
• Nominal power during heating (1): 3.4 A
• Nominal energy efficiency index (1) EERd: 3.1
• Nominal efficiency coefficient (1) COPd: 3.4
• Energy efficiency class in cooling (1): A+
• Energy efficiency class in heating (1): A
• Power consumption in “thermostat off” PTO position: 14 W
• Power consumption in “standby” mode (EN 62301) PSB: 0.5 W
• Power consumption for equipment with dual channels (1) cooling QDD: 0.5 kWh/h
• Power consumption for equipment with dual channels (1) heating QDD: 0.4 kWh/h

Features:

• Cooling, additional heating, dehumidification and ventilation
• Economy function: enables energy savings through automatic optimization of machine performance
• Auto function: adjusts the operating parameters in relation to the ambient temperature.
• Silent Mode function: mode that sets the machine to the lowest noise level. The compressor and fans are set to reduce sound power by up to 30 dB(A).
• Timer 24h

Features:

• Available in the HP version (heat pump). In the absence of condensation drainage, it is possible to configure the machine, during installation, in the SF version (cold only) and disable the heating function
• Class for cooling: up to A+
• Refrigerant: R290 (GWP=3)
• The main internal components are accessible from the front on already installed machine
• Wide flap for an even distribution of the air in the room Equipped with a multi-filter system consisting of an electrostatic filter (with anti-dust function) and an active carbon filter (effective against unpleasant odors)
• Backlit display and touch controls on the machine
• Contact on/off for switching on or energy boost.
• There is an RS485 port suitable for air conditioning control with external BMS via Modbus RTU.
• Packaging 100% recyclable, 98% plastic-free.

Preconditions for operation

Internal ambient temperatures: 

• Maximum operating temperatures in cooling DB 35°C - WB 24°C
• Minimum operating temperatures in cooling DB 18°C
• Maximum operating temperatures in heating DB 27°C
• Minimum operating temperatures when heating -

External ambient temperatures: 

• Maximum operating temperatures in cooling DB 43°C - WB 32°C
• Minimum operating temperatures in cooling -
• Maximum operating temperatures in heating DB 24°C - WB 18°C
• Minimum operating temperatures for heating -15°C

(1) Test conditions: the data refers to the standard EN14511 - Heating mode: Temperature: external environment DB 7°C / WB 6°C; internal environment DB 20°C / WB 15°C Cooling mode: External environment temperature DB 35°C / WB 24°C; internal environment DB 27°C / WB 19°C. * Hermetically sealed natural gas appliance with GWP equivalent 3.