The Vaillant ecoTEC plus combines high quality, minimal consumption, and optimal heating comfort. With the ecoTEC plus, you can heat efficiently without compromising on proven quality. The ecoTEC plus is a sealed boiler with an additional safe metal casing with acoustic insulation and a safety siphon that prevents the leakage of combustion gases. The boiler ensures reliable operation. This means that the unit will always deliver heat, even if one of its components temporarily fails.
Future-Proof
In the future, it may be possible to heat with natural gas mixed with up to 20% hydrogen. Hydrogen is a promising energy source that could ultimately enable the transition to a CO2-neutral energy supply. Our ecoTEC plus is already suitable for mixing 20% hydrogen with natural gas. The boiler has been extensively tested and validated to safely heat homes and provide hot water with 20% hydrogen, without any adjustments.
Additionally, the ecoTEC plus is hybrid ready; the heating system can be expanded with a heat pump. This allows you to use renewable energy sources and heat more efficiently than ever before. Management or remote control is possible with the optional sensoNET gateway in combination with the sensoAPP.
Advantages:
Technical Specifications:
Feature | Value |
---|---|
Brand | Vaillant |
Supplier Code | 0010024614 |
EAN Code | 4024074896471 |
Discount Group | 017 |
Width | 440 mm |
Height | 720 mm |
Depth | 348 mm |
Number of Phases | 1 |
Energy Efficiency Class | A |
Material Quality | Other |
Inlet Connection | Compression |
Return Connection | Compression |
Frequency | 50 Hz |
Closed Model | Yes |
SEER (Ns) under average conditions | 94 |
SEER (Ns) under colder conditions | 98.7 |
SEER (Ns) under warmer conditions | 88.1 |
Supplementary electricity consumption under full load (ELmax) | 0.03 kW |
Useful heat output at nominal output and high temperature operation (P4) | 24.9 kW |
Useful efficiency at nominal output and high temperature operation (n4) | 88.1 % |
Supplementary electricity consumption in standby mode (Psb) | 0.002 kW |
Standby heat loss (Pstby) | 0.048 kW |
Maximum hydrogen percentage in mix with NAT gas | 20 % |
Suitable for low-calorific natural gas | Standard factory setting |
Suitable for high-calorific natural gas | Automatically adjustable |
Suitable for propane | Manually adjustable |
Suitable for butane | Not suitable |
Suitable for methane | Automatically adjustable |
Suitable for LPG | Not suitable |
Suitable for hydrogen | Not suitable |
Energy Efficiency Class for Space Heating (811/2013/EU) | A |
Nominal Load | 4.1 - 28.3 kW |
Gas Supply Pressure | 17 - 30 mbar |
ηs, h (seasonal energy efficiency for space heating) | 94 % |
Heat Exchanger Material | Stainless Steel (SS) |
Built-in Pump Control | Yes |
Gas Certification VR/SV | No |
Gas Certification NZ | No |
Nominal Load Lower Value | 25.5 kW |
Nominal Load Upper Value | 28.3 kW |
Min. Working Pressure | 0.3 bar |
Min. Return Temperature | 1 °C |
Max. Gas Supply Pressure | 30 mbar |
Built-in Weather-Dependent Control | No |
Built-in Expansion Vessel | No |
Nominal Output 80-60 °C | 24.9 kW |
Max. Supply Temperature (Operating Temperature) | 85 °C |
Max. Working Pressure | 3 bar |
Built-in Filling/Drain Valve | No |
Built-in Pressure Relief Valve | Yes |
External Pipe Diameter Inlet | 22 mm |
External Pipe Diameter Return | 22 mm |
Fuel Connection | Other |
External Pipe Diameter Fuel | 15 mm |
Air Supply Connection | Push-fit |
Nominal Channel Diameter Air Supply | 80 mm |
Flue Gas Connection | Push-fit |
Condensate Connection | Flexible |
External Pipe Diameter Condensate | 25 mm |
Min. Gas Supply Pressure | 20 mbar |
Suitable for Natural Gas | Yes |
Gas Certification VR | No |
Nominal Channel Diameter Flue Gas | 80 mm |
Modulating Burner Control | Yes |
Built-in Manometer | Yes |
Condensing | Yes |
Gas Certification HR | Yes |
Efficiency | 107 % |
Pilot Flame | No |
Second Return Connection | No |
Control Signal On/Off | Yes |
Control Signal High/Low | No |
Control Signal 0-10V | Yes |
Control Signal OpenTherm | Yes |
Operation as Open Version (Air Supply Possible) | Yes |
Nominal Output 50-30 °C | 27 kW |
Suitable for Propane | Yes |
Suitable for Butane | No |
Suitable for Methane | Yes |
Max. Permissible Operating Pressure | 3 bar |
Nominal Diameter Inlet | 3/4" (20) |
Nominal Diameter Return | 3/4" (20) |
Nominal Diameter Fuel | 1/2" (15) |
Nominal Diameter Condensate | DN 20 |
Conversion Kit Required | No |
Operating Pressure | 0.3 - 3 |
CW Label | 0 |
Gas Certification HR | Yes |
Gas Certification NZ | No |